Description: This OEM Ford Small Block Hydraulic Clutch Bell Housing was removed from a 1985 Ford F150 with a 302, and comes with the Block Plate, & Bracket, New Slave, New Boot, New Fork, and the Bolts as seen in the pictures. You will need to get pressure plate bolts to match your flywheel. These hydraulic bellhousings were made from 1984 to about 1993 and are great for a hydraulic clutch conversion. Just an FYI: The little plastic C-clip pops into the slave cylinder after it is installed into the bracket to help hold it in place. These bellhousings use the standard Ford 4 speed butterfly transmission bolt pattern and use a 164-tooth flywheel, these will NOT bolt to a T5. These fit the Ford 302 & 351W small blocks and the big 4.9L I6 (the I6 uses smaller clutch bolts 5/16 vs 3/8 for most small block flywheels). This bellhousing was cleaned and painted and has a New Slave cylinder, New Boot, and New Fork. The bellhousing and parts in the pictures are the exact parts you will receive; these are not stock photos. This set is already packed and boxed for shipping. Please verify it will fit your application prior to purchasing. You are buying it to own it, not to try it out. This will be shipped signature required within the 48 either FedEx or UPS ground, so no PO boxes. Also, if you are not in the 48, then email me and I can remove the shipping restrictions and I can ship these using the priority mail with the increased shipping costs through the Post Office. Out of the US you can use eBays global shipping program. #1020
Price: 400 USD
Location: Seattle, Washington
End Time: 2024-12-26T17:43:08.000Z
Shipping Cost: 45 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Ford
Type: Bell Housing
Manufacturer Warranty: none
Country/Region of Manufacture: United States
Performance Part: No