Microprocessor Contactless Ignition System for JAWA with Ignition Coil with HVW

Description: General information The microprocessor-based contactless ignition system 1146.3734 is a logical continuation of the development of electronic ignition, designed to operate in the JAWA motorcycle electrical system of all models with a 6 or 12 volt generator. Microprocessor ignition software allows you to select the desired operating mode of the motorcycle engine by connecting in a specific sequence of output wires.This kit also includes high-voltage wires with distributed resistance, which allows you to get the maximum positive effect from the use of our microprocessor-based contactless ignition system on a motorcycle.The microprocessor-based contactless system is designed to improve the technical characteristics of a motorcycle due to: stability and dynamism of the engine due to the function of automatically changing the ignition timing depending on engine speed; reduction of toxicity of exhaust gases, fuel consumption and reduction of soot on candles, due to the increase in the inductive phase of the spark; sustainable engine starting when the battery voltage is reduced; reduce the complexity of maintaining the ignition system with an optical sensor; limiting the magnitude of the current and the time it flows through the primary winding of the ignition coil to protect it from overheating and rapid discharge of the battery. Specifications The rated supply voltage is 6-12V with a grounded negative battery. The current consumption when the ignition switch is turned on and the engine is idle does not exceed 0.15 A. THE MICROPROCESSOR-BASED CONTACTLESS IGNITION SYSTEM provides uninterrupted sparking when the voltage in the on-board network changes from 5 V to 16 V. The system provides uninterrupted sparking at a crankshaft speed of up to 8000 rpm. The ignition system is operable in the range of ambient temperatures from -25 to +60 degrees C. The microprocessor-based ignition timing used in the MPBFZ ensures stable operation of the system in all normal engine operation modes. This MPBS works with standard ignition coils, but provides the best sparking parameters with standard automotive two-electrode coils (4412.3705, 406.3705, 3012.3705, 3022.3705).General information The ignition coil is designed to operate in a non-contact ignition system in the electrical system of 2-cylinder carburetor engines of motorcycles of the Ural, Dnepr, IZh, Java types of all modifications. Coil 135.3705M is designed for motorcycles equipped with an electronic ignition system. The coil provides the best sparking parameters with (contactless ignition system) and MPBSZ (microprocessor ignition system) manufactured by SoveK LLC. The ignition coil 135.3705M operates both on motorcycles equipped with a 12-volt generator, and on motorcycles with a 6-volt generator. Technical details Coil supply voltage with the negative terminal of DC sources connected to the motorcycle body: minimum - 5V; rated - 6V or 12V; maximum - 16V. Secondary voltage, at a burst current of 4A, shunt resistance 3MOhm, shunt capacitance 50Pf: at a temperature of 25 ° C, not less than 18 kV; at a temperature of 85 ° C, at least - 16kV; Burst current - 4A. The resistance of the primary winding, Ohm - 0.80 ± 0.05; Coil weight, kg, not more than 0.25; Overall dimensions, mm, no more - 97 × 45 × 58 LLC "SOVEK" Motocycle Parts Booking Now Microprocessor Contactless Ignition System for JAWA with Ignition Coil with HVW General information The microprocessor-based contactless ignition system 1146.3734 is a logical continuation of the development of electronic ignition, designed to operate in the JAWA motorcycle electrical system of all models with a 6 or 12 volt generator. Microprocessor ignition software allows you to select the desired operating mode of the motorcycle engine by connecting in a specific sequence of output wires.This kit also includes high-voltage wires with distributed resistance, which allows you to get the maximum positive effect from the use of our microprocessor-based contactless ignition system on a motorcycle.The microprocessor-based contactless system is designed to improve the technical characteristics of a motorcycle due to: stability and dynamism of the engine due to the function of automatically changing the ignition timing depending on engine speed; reduction of toxicity of exhaust gases, fuel consumption and reduction of soot on candles, due to the increase in the inductive phase of the spark; sustainable engine starting when the battery voltage is reduced; reduce the complexity of maintaining the ignition system with an optical sensor; limiting the magnitude of the current and the time it flows through the primary winding of the ignition coil to protect it from overheating and rapid discharge of the battery. Specifications The rated supply voltage is 6-12V with a grounded negative battery. The current consumption when the ignition switch is turned on and the engine is idle does not exceed 0.15 A. THE MICROPROCESSOR-BASED CONTACTLESS IGNITION SYSTEM provides uninterrupted sparking when the voltage in the on-board network changes from 5 V to 16 V. The system provides uninterrupted sparking at a crankshaft speed of up to 8000 rpm. The ignition system is operable in the range of ambient temperatures from -25 to +60 degrees C. The microprocessor-based ignition timing used in the MPBFZ ensures stable operation of the system in all normal engine operation modes. This MPBS works with standard ignition coils, but provides the best sparking parameters with standard automotive two-electrode coils (4412.3705, 406.3705, 3012.3705, 3022.3705).General information The ignition coil is designed to operate in a non-contact ignition system in the electrical system of 2-cylinder carburetor engines of motorcycles of the Ural, Dnepr, IZh, Java types of all modifications. Coil 135.3705M is designed for motorcycles equipped with an electronic ignition system. The coil provides the best sparking parameters with (contactless ignition system) and MPBSZ (microprocessor ignition system) manufactured by SoveK LLC. The ignition coil 135.3705M operates both on motorcycles equipped with a 12-volt generator, and on motorcycles with a 6-volt generator. Technical details Coil supply voltage with the negative terminal of DC sources connected to the motorcycle body: minimum - 5V; rated - 6V or 12V; maximum - 16V. Secondary voltage, at a burst current of 4A, shunt resistance 3MOhm, shunt capacitance 50Pf: at a temperature of 25 ° C, not less than 18 kV; at a temperature of 85 ° C, at least - 16kV; Burst current - 4A. The resistance of the primary winding, Ohm - 0.80 ± 0.05; Coil weight, kg, not more than 0.25; Overall dimensions, mm, no more - 97 × 45 × 58 New CollectionSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWSHOP NOWPaymentShippingReturnsAbout Us Payment PaymentShippingReturnsAbout Us Payment We accept PayPal only We ship to Ebay's address only. Please make sure your address in EBAY is matched with your shipping address before you pay.PaymentShippingReturnsAbout Us Shipping PaymentShippingReturnsAbout Us Shipping We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it 14 - 30 days after dispatch). Your items will be delivered with tracking number. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.PaymentShippingReturnsAbout Us Returns PaymentShippingReturnsAbout Us Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Buyer pays for returns.PaymentShippingReturnsAbout Us About Us PaymentShippingReturnsAbout Us About Us High quality of the product is the main thesis in the work of our enterprise, the origins of which as a manufacturer of auto electronics go back to the good Soviet eighties. Paying great attention to quality, we do not forget about the price. Working directly with leading domestic and foreign manufacturers of components allows us to offer consumers, in addition to quality, the most reasonable prices. The company SoveK LLC has been represented on the Ukrainian, Russian and Belarusian markets since 2000. For more than 10 years of our history, we have managed to occupy a strong position in the automotive electronics market, gain the authority and trust of numerous customers, including private consumers and corporate users. Since 2007 we have been the only supplier of electronic switches, electronic breaker PE-1 - JSC "MOTOVELO", one of the largest motorcycle manufacturers in the territory of the former USSR. We produce a wide range of electronics products for cars produced by AvtoZAZ, AZLK, VAZ, GAZ, UAZ, ZIL, MAZ, KAMAZ, agricultural and motor vehicles. Recently, the enterprise has mastered the production of a whole range of products for national economic purposes. Having our own high-tech equipment and qualified personnel with experience in development and production allows us to achieve the required quality and reliability of products, to quickly master new products and modernize existing ones.

Price: 78.99 USD

Location: Kyiv

End Time: 2024-09-03T04:21:49.000Z

Shipping Cost: 0 USD