LOT Tamiya Wild Willy 2 1/10 RC Wild Willy 2 Kit (Tam58242) and Blitzer Beetle

Description: Old School Tamiya RC kits from the late 90's! Used with obvious wear and tear after 2 years of use. They have been sitting in a box for the last 24 years and they need a home with love and use for them!Kits included (see below for manufacturers descriptions), Wild Willy Jeep, Beach Buggy painted in Dr. Evil style!, Two Futaba remotes and Tower Hobbies charger. Will include all my available batteries although not sure if they work anymore.The kits have been in storage and have not been tested, so I will refund any item that does not work as indicated in full.- Wild Willy 2 The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.WR-02 Chassis:The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.●1/12 Scale　●Length: 345mm, Width: 270mm, Height: 270mm ●Wheelbase: 170mm ●Weight: 1,360g (not including R/C units and battery pack)　●Type 540 Motor ●Rear-Wheel Drive ●Tire Width/Diameter: (F/R) 113/70mm　●Tread: 265mm (Front), 270mm (Rear) ●Monocoque Frame Chassis　●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio=1:18.3Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS painthttps://www.tamiyausa.com/shop/110-trucks/rc-wild-willy-2000-3/- Blitzer Beetle This is a 1/10 scale R/C assembly kit of the Blitzer Beetle, which was inspired by the exciting off-road desert racer designs seen in the United States. The proven chassis is equipped with 4-wheel double wishbone suspension, CVA shock units, and high-grip off-road tires to offer superb driving performance on rough terrain. The injection-molded body features metal-plated light covers and side mirror parts for greater realism. In addition, a driver figure as well as a sticker sheet to depict the fiery splash-pattern livery are also included.2WD Off-Road ChassisThis tough, lightweight ABS bathtub chassis features a rear-mounted motor, rear-wheel drive layout. Fully-enclosed gearbox protects against dirt and debris and is equipped with differential gears to offer smooth cornering. 4-wheel independent double wishbone suspension is equipped with C.V.A. shock units and extremely durable monocoque-type lower arms. The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high levels of grip.●Length: 394mm　●Width: 295mm　●Height: 182mm　●Wheelbase: 260mm　●Tread: 248mm (Front), 242mm (Rear)　●Tire Width/Diameter: 45/98mm (Front),　52/99mm (Rear) ●ABS Bathtub Type Chassis Frame　●Injection-Molded Body with Driver Torso Figure　●Rear-Mounted Motor, Rear-Wheel Drive　●3-Bevel Differential Gears　●F/R Double Wishbone Suspension　●F/R CVA Shock Units　●Gear Ratio＝ 1:10.00 ●Type 540 Motor includedRequires: 2-Channel radio, servo, 7.2 volt battery & compatible battery charger, and Tamiya TS plastic spray and bottle paint.https://www.tamiyausa.com/shop/-road-buggies/rc-blitzer-beetle-2011-2/none/- Futaba Magnum Jr 2 channell controller- Futaba Magnum Sport 2 channell controller

Price: 350 USD

Location: Sarasota, Florida

End Time: 2024-09-07T16:04:38.000Z

Shipping Cost: 80 USD