Irritec Perma-Loc Tubing x 400 Barb Takeoff Valve

Description: The Perma-Loc connector on this fitting is compatible with Drip Depot polyethylene tubing of the same size. This Perma-Loc Tubing (600 series) x 400 Barb Takeoff Valve can be used to connect our 1/2" (.600" ID x .700" OD) poly tubing or dripline as lateral lines from any 3/4" or larger poly tubing used as your mainline. The 7mm/400 barb requires the larger punches, such as Drip Depot items #1550 or #14544, to make the correct size hole in the sidewall of the mainline tubing. 7.0 (400 barb) is recommended for flow rates of up to 2.5 GPM per line; About Drip Depot Perma-Loc Drip Irrigation Fittings:Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The tubing connectors can be used on blank tubing as well as drip line. To Use: Simply twist the locking collar back towards the center of the fitting exposing the barb. Then push tubing or tape over barbed end. Next, hand-tighten locking nut over tubing or tape for a permanent secure fit.; To Remove: Just loosen locking nut, pull tube off and re-use as needed.; Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting. Perma-Loc SeriesNominal SizeAcceptable Inside Tubing Diameter Acceptable Wall Thickness 5003/8".510" to .580".035" to .055"6001/2".590" to .630".025" to .050"8003/4".790" to .845".045" to .065"10001"1.025" to 1.085".045" to .070"

Price: 8.06 USD

Location: White City, Oregon

End Time: 2024-04-26T18:54:07.000Z

Shipping Cost: 0 USD