Headlights Assembly For 2012-2015 Toyota Tacoma Chrome Housing Amber Corner Lamp

Description: --> Feature : - Completely sealed: Prevents moisture from being trapped inside the housing. - One-way vent: Drives out moisture and avoids lens misting. - Multi-surface reflectors: Increase light output & distance. - PC lens: Impact resistance for an enhanced driving experience in any environment. Fits for : - For 2012-2015 Toyota Tacoma - PART NUMBER: 6221-0151L, 6221-0151R - HOLLANDER: 114-51505BL, 114-51504BR - OE#: 81150-04181, 81110-04181 - PARTSLINK: TO2502213, TO2503213 Specification : - Condition: 100% Brand New and High Quality - Color: Chrome Housing + Clear Lens - High Beam: H4 (Bulbs are not included) - Low Beam: H4(Bulbs are not included) - Coner Beam: W5W (Bulbs are not included) Packing List : - 1 Pair of Headlights (Driver & Passenger Side) Please Note : Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground. 1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle. 2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line. 5. 【Test your results】 Condensation DOES NOT Mean a Product Problem It's normal that the condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it is not the quality problem of headlights. How to Remove Temporary Condensation 1. Check the vents to prevent blocking and switch on the low beam light for about 20 mins 2. Take the headlight bulb out and drive out moisture 3. Put a silica gel packet in the housing to soak up moisture WE ACCEPT THESE PAYMENT METHODS ( 10% sales tax will be applied for orders shipped to Washington state by state law ) 30 Days easy returns satisfaction guarantee. Items to be returned must be in original factory condition. Please enclose a note about item number and order id, your eBay ID and the reason of return.

Price: 71.99 USD

Location: Dallas, Texas

End Time: 2024-08-11T03:54:34.000Z

Shipping Cost: 0 USD