Fujikura FSM-70S fiber optic Fusion Splicer complete kit 13247 arc count GREAT!

Description: The Fujikura 70S Fusion Splicer is a fully ruggedized, fiberoptic core alignment fusion splicer, providing consistent, low loss, splice performance. The advanced design streamlines the steps required to complete splices, resulting in greater productivity. Configurable automation features allow you to customize the operation of the machine to best suit your particular splicing technique and process. This is important when splicing special fibers, especially ones with core diameters less than the standard SMF-28, and when splice leads must be extremely short. The photonics industry continues to rely on this fusion splicer to make the quickest, lowest loss splices in single mode fibers. The rugged construction resists shock, rain and dust, and can withstand a 30-inch drop test. Ruggedness and durability are greatly enhanced by a mirror-less optical system and severe-impact resistant monitor. Two key features include an automated wind protector and a tube heater which has been developed to reduce the number of operational steps for quicker splicing times. The wind protection system greatly facilitates the splicing process by closing against the environment when the splice is performed, followed by an automatic tensile strength test, then opening when completed. The splice is then situated within a splice protector sleeve and placed within the heating clamshell system that shrinks the protection sleeve sealing the fiber splice against possible environmental mechanical stress. The 70S has a high-resolution LCD monitor, a high-capacity rechargeable Li-ion battery pack for extended operation time, and technical info-both integrated and on CD disc. The battery provides power for approximately 200 splices. A super rugged transport case and internal carrier tray performs as a mobile workstation while providing additional shock protection when shipping and at the work site. ACCESSORIES INCLUDED IN THIS SALE: • BTR-09 Battery• DCC-18 Battery Charge Cord • CT30 Cleaver • ADC-18 AC Adapter • ACC-14 AC Cord • ELCT2-20A Spare Electrodes (pair) • USB Cable • Alcohol Dispenser • Splicer Carrying Strap • CC30 Transit Case with Carrying Strap • CD Instruction Manual fEATURES: • Bluetooth wireless communication • Automated and programmable wind protector • 13-second automated tube heater • Fully ruggedized for shock, dust and moisture • Li-ion battery with 200 splices/shrinks per charge • 5 mm cleave length for splice on connector or small package needs • Sheath clamp or fiber holder operation • Training and support videos • Multifunction transit case with integrated workstation Specifications: Applicable Fibers: Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Cladding Diameter: 80 - 150 μm Coating Diameter: 100 μm to 1,000 μm Fiber Cleave Length: 5 to 16 mm Typical Average Splice Loss: 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time: SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fiber Arc Calibration Method: Automatic, real-time and by using results of the previous splice when in AUTO mode, manual arc calibration function available Splicing Modes: 100 preset and user-programmable modes Splice Loss Estimate: Based upon dual-camera core axis alignment data Storage of Splice Result: Last 2,000 results stored in the internal memory Fiber Display: X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification: 320X for single X or Y view, or 200X for X and Y view Viewing Method: Dual cameras with 4.7 inch TFT color LCD monitor Operating Condition: 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively Mechanical Proof Test: 1.96 to 2.25N Tube Heater: Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time: Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves Protection Sleeve Length: 60 mm, 40 mm, micro Splice/Heat Cycles with Battery: Typical 200 cycles with the power save functions activated Electrode Life: 3,000 Arc Discharges Power Supply: Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery Terminals: USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 Wind Protection: Maximum wind velocity of 15 m/s. (34 mph) Dimensions: 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) Weight: 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

Price: 6500 USD

Location: Los Angeles, California

End Time: 2024-09-07T20:43:14.000Z

Shipping Cost: 0 USD