FS One R/C Flight Simulator V2 with Spektrum Dx6i Transmitter Adapter Cable NEW

Description: FS ONE V2 R/C FLIGHT SIMULATOR FOR SPEKTRUM Dx6i Includes Transmitter Adapter Cable for the following: Spektrum DX6i JR 12XNotes:Spektrum DX6i cable also supports Hitec Aurora 9.Spektrum DX7se is not compatible with flight simulators. FS One V2 is designed to be the most accurate simulation of RC flight. It is based on decades of experience flying and simulating model aircraft in all categories: trainers, sport planes, aerobatic airplanes, jets, warbirds, foamies, sailplanes and helicopters. Aerodynamically, FS One V2 is unsurpassed for ultimate realism in flight simulation. Superior Aerodynamics Only FS One gives you aerospace research-level aerodynamics – all airplane flight models developed by Michael Selig, PhD. You get unrivaled path-tracking accuracy from its true-to-life complex 360-degree flight dynamics engine. Fine tune your skills at home, fly at the field, avoid surprises and save money and time. Ultimate Physics Learn and perform extreme aerobatics with the best physics engine that captures anything and everything – stalls, tip stalls, snap rolls, spins, hover, torque rolls, harriers, rolling harriers, blenders, elevators, walls, parachutes, waterfalls, Lomchevaks and more. These maneuvers are all a natural outcome of the extensive aerodynamics and physics engine in FS One. What’s new with FS One Version 2 Better Aerodynamics – Years of research has improved FS One’s already best-of-breed aerodynamics. You’ll feel the difference across the entire flight envelope – normal flight, stalls, spins, and mild through extreme 3D maneuvers. Aircraft – V2 has over 40 stock aircraft. V2 also bundles in the V1 Hangar Pack aircraft for free. Also, the Scaling Wizard™ inside FS One turns any airplane into any size, physics included automatically. The number of airplanes is virtually limitless. Free Aircraft – FS One V2 supports free aircraft downloads. Some new airplanes are the BD-5J microjet, Spitfire MK.II 60 by Hangar 9, Extra 260 35%-scale by Hangar 9, Cap 232 27%-scale by Hangar 9, Four-Star 60 by SIG, Sbach 342 by RC Xtreme Machines, Focke-Wulf FW 190, and more. High-Resolution Interface – V2 comes with a new USB interface that has four times more resolution than before (10 bits, 1024 counts). Never before has an RC simulator had this much resolution between your transmitter sticks and computer. It’s as smooth and accurate as your real transmitter. Want more resolution? Download the free V2 upgrade to 2048 resolution. That is eight times the resolution of the most all other simulators available. Panos and 3D Flying Sites – FS One has both. Fly on board or from the ground, in a 3D world or with photorealistic graphics. Free panos along with free airplanes. Use Your Own Transmitter or the TacCon – With the best aerodynamics, we’ve made it easy to get the best out of your simulator. Use your own transmitter, and what you feel in the sticks, you’ll feel at the field. FS One V2 also supports the TacCon controller from V1 (requires V2 TacCon cable). Easy Transmitter Setup – A Calibration Wizard automatically assigns channels to 4- to 8-channel transmitters. Works with any Transmitter Mode – Designed for any transmitter mode: Mode 1, 2, 3 or 4. Mode 2 is most common in US. Multi-Monitor Support – FS One V2 supports multiple monitors. Fast Install from DVD – Installation is four times faster than V1, and needs no CD-swapping. Updated – V2 bundles in all updates from V1. More Updates – Download V2 updates for new features and aircraft. Current version: 2.1.4 (r1461). Extras – Download V2 Extras for new aircraft and features, e.g. Electric Sbach 342 with the FS One stability and control augmentation system (SCAS), pylon racing improvements, other ideas we’re testing out for feedback. Aircraft, Flying Sites and Skyscapes Experience aircraft that look as real as they fly. FS One comes with authentic, highly detailed, photo-realistic airplanes, helicopters, jets, sailplanes, and foamies. All aircraft have movable surfaces and breakable parts. Over 40 of RC’s most popular aircraft included along with free downloadable aircraft and updates from FSOne.com. With the stock airplanes and their variants, there are over 130 airplanes to choose from when you install FS One V2 and the free updates. Over 30 different flying sites – both 3D and photo-panoramic flying sites. Also, match any 3D flying site with any of 40 fabulous photo-panoramic skyscapes to create 240 unique combinations and improve your skills. Aircraft: AirplanesPick up your transmitter, start FS One, and you’ll feel like you’re at the flying field. Fly them all – trainers, warbirds, aerobatics, sport planes, electrics, sailplanes, jets, ducted-fans and foamies with world-class aircraft graphics, many based on actual CAD models, 3-view drawings and photo realistic textures. It’s accuracy where you need it – where your eye is focused when you fly. They not only look great standing still in the screen shots below, but all parts come alive when you fly. Control surfaces move in concert with your controls. Then more realism takes over – landing gear flexes, wheels spin, wings bend under load, propellers spin up, control surfaces flutter in the propeller wakes, parts break off in hard landings and high g-loads in flight, engines make real engine sounds, and you hear the swoosh of air over the airframe. You’re flying like real, except risk free and anytime 24×7 rain or shine. In addition to the stock aircraft in FS One, many are modified and scaled to popular sizes offered by major brands, and some are resized to extremes. Fly variants from a 3-in span Aerobird all the way up to full-size “RC” airplanes like the Pawnee and many others – 100% scale! The Scaling Wizard™ and FS One physics are powerful enough to cover them all. With the stock airplanes and their variants below, there are over 130 airplanes to choose from when you install FS One V2 and the free updates. Use the FS One Scaling Wizard and airplane editor to create any number of your own variants in seconds – no other simulator comes close. BD-5J 50% by Bill Hempel BD-5J 50% and 100% variants Spitfire MK.II 60 by Hangar 9 Spitfire and variants Cap 232G 27% by Hangar 9 Cap 232G and variants Extra 260 35% by Hangar 9 Four-Star 60 by SIG FW 190 A-8 25% FW 190 and 20%-scale variant Sbach 342 40% by RCX Sbach 342 and variants Aerobird Xtreme by HobbyZone Aerobird and variants Alpha 40 by Hangar 9 Alpha 40 and variant Stryker and ultra mini Stryker Brio 10 by E-flite Ascent by E-flite Ascent and variants Bobcat XL by BVM Bobcat XL and variants F4U Corsair 60 by Hangar 9 Corsair and variants Edge 540 33% by Hangar 9 Edge 540 and variants Extra 260 3D by E-flite Firebird by HobbyZone Funtana 90 by Hangar 9 Funtana 90 and variants J-3 Cub by ParkZone J-3 Cub and variants Funtana 40 by Hangar 9 J-3 Cub by Hangar 9 MiG-15 BVM prototype MiG-15 and variants P-51 by Hangar 9 P-51 and variants P-51 PTS by Hangar 9 P-51 PTS Step 1 to 5 Pawnee 30% Pawnee and variants ShowTime 50 by Hangar 9 ShowTime 50 SFG by Hangar 9 F-27B Stryker by ParkZone Supra by Kennedy Composites Swift 44% Swift and variants T-34 by Hangar 9 T-34 and 33%-scale variant Texan by Hangar 9 Texan and 33%-scale variant Tracon TD Tracon and 100-in variant Tracon-K2/DS Slo-V by ParkZone Tribute 3D by E-flite Tribute 3D and variants Ultimate 3D by E-flite Ultimate 3D and variant Ultimate TOC 46% by Hangar 9 Ultimate TOC and variants Ultra Stick Lite 120 by Hangar 9 Ultra Stick Lite 120 and variants Twist 40 by Hangar 9 HelicoptersLearn to fly helicopters with FS One starting with the E-flite Blade coaxial (CX) helis with and without trainer gear, then the micro Blade CP and CP Pro and on up, including the jet-powered JetCopter SX and the TRex 450SA by Align. All rotor parts move and parts break off in hard landings. Blade CX by E-flite Blade CX with trainer setup Blade CX2 by E-flite Blade CX2 with trainer setup Blade CP by E-flite Blade CP with trainer setup Blade CP Pro by E-flite Blade CP Pro with trainer setup Voyager E by JR Voyager E with trainer setup Voyager 50 by JR Voyager 50 with trainer setup JetCopter SX (Jetcat powered) Vigor CS by JR TRex 450SA by Align Scaling Wizard™ and Aircraft Editor Create and resize any airplane to your favorite size with the FS One Scaling Wizard™ and Aircraft Editor. Set the new size, and the rest is all automatic. No fussing around, no kidding. Use the Scaling Wizard to resize any airplane, e.g. resize a park-flyer sized jet to 75% scale in seconds, and fly an unlimited number of aircraft variants to test your skills and try out new designs. No size or speed limits! Airplane and Helicopter Training Learn from world-class RC pilots. Step-by-step beginner lessons and advanced aerobatics instruction for airplanes and helicopters are included. Pilot voice-over, transmitter control stick display, and playback controls guide each lesson. Instruments and Navigation Features Use FS One’s extensive array of user-friendly view commands and tools to let you enjoy the action from almost any perspective. Add transmitter stick display, moving/multi-mode map, heads-up display (HUD), multi-function timer with audible, compass, wind sock, inset windows for additional views while flying, Sky Grid™, radar gun, variometer for rate of climb/descent and more. Use Your Favorite RC Transmitter For the most authentic control feel, connect your own real transmitter to FS One using the included USB transmitter interface and Adapter Cable. Built-In Transmitter Editor FS One’s extensive Transmitter Editor lets you simulate a huge number of programming and control changes and immediately see their effects. Mix channels, add expo, adjust endpoints, alter sub-trims – most anything you can do with top-of-the-line 8-channel programmable radio systems you can do with the FS One’s USB interface and a compatible transmitter. You can also augment transmitter functions with your keyboard.Keyboard Controls Take control with FS One’s extensive keyboard support. While flying, turn on airshow smoke, popup instruments and navigation aids, show multiple views, and use dozens of other features. Your Connection to FS One: 2048 Resolution. The FS One transmitter USB interface comes with 1024 stick-tracking resolution. That’s four times higher stick-tracking resolution than any other RC simulator, and its upgradable for free to 2048 resolution. That’s eight times (8X) the resolution of any other RC simulator available. The new 2048 resolution fully captures the capability of most top-of-the-line transmitters from most major brands. What’s in the box? Install DVD FS One V2 USB Interface Adapter Cable (selected with purchase) Color Keymap for keyboard controls (via download link) Quick Start Guide (via download link) Required, but not included: Transmitter with trainer port or the TacCon controller SYSTEM REQUIREMENTS The minimum system requirements: Operating System:Windows XP/Vista/7/8/8.1 Processor: 1.8 GHz Memory: 512 MB RAM Hard Disk Space: 4 GB Video/Graphics: 64 MB RAM NVIDIA GeForce4 Ti, GeForce 5200 or better ATI Radeon 9200 or better USB port DVD drive (for install) The recommended system requirements: Operating System:Windows XP/Vista/7/8/8.1 Processor: 2.8 GHz or better Memory: 1 GB RAM or more for Windows XP; 2 GB RAM or more for Windows Vista/7/8/8.1 Hard Disk Space: 4 GB Video/Graphics: 128 MB RAM or more NVIDIA GeForce 6600 or above, 7000-series, or better ATI Radeon X600 or better USB port DVD drive (for install) Intel HD Graphics is not recommended. AMD APU integrated graphics is not supported.

Price: 159.99 USD

Location: Champaign, Illinois

End Time: 2024-02-18T02:53:05.000Z

Shipping Cost: 10.4 USD