Description: DBX DriveRack VENU360 Venue 360 3x6 Loudspeaker Management System The DriveRack VENU360 from dbx is a loudspeaker-management processor designed to protect and optimize front-of-the house, stage monitor, delay-fill, and zone loudspeaker systems in clubs, outdoor music events, or houses of worship. Connect the VENU360 between your mixer and amplifiers/powered speakers, and use it for precise feedback elimination, automatic speaker level and room equalization, crossover-frequency setting, dbx compression/limiting, driver alignment delay, and more. The unit provides a 5 x 6 routing/mixing matrix (using four AES signals and one analog signal) and a 3 x 6 signal processing chain. The 24-bit A/D and D/A converters with dbx Type IV conversion protect the incoming audio signal from accidental digital clipping at the A/D stage, while the 32-bit floating point, 48 / 96 kHz internal processing produces professional audio quality with high headroom and wide dynamic range. For easy operation, the Wizard functions guide you through simple, step-by-step processes to help you quickly configure the unit. For more control, you can use the manual mode which lets you customize each parameter separately. A large, bright, LCD display and nine 6-segment signal meters provide easy-to-read visual feedback. Additionally, the free DriveRack VENU360 control application offers network control via the built-in Ethernet port, and is available for iOS, Android, Mac, and Windows-compatible devices. Provides a 5 x 6 routing/mixing matrix with a 3 x 6 signal processing chain24-bit A/D & D/A converters with dbx Type IV conversion and 48 / 96 kHz, 32-bit floating-point processing – with sample rate conversionSetup Wizard for easy system configuration and Level Assist Wizard for system level balancingAutoEQ Wizard for fast & accurate room equalization using 10-band parametric EQ; further user adjustments can be made to bands 11 to 14AFS Wizard for easy & accurate feedback suppressionSupport for multi-mono, stereo, LCR, & aux-fed sub input configurationsSelectable 31-Band graphic EQ or 12-band parametric EQ with narrow notch capabilities for speaker tuningInput Delay processing for aligning the sound system of the stage backline, and Fill Delay processing for balcony & tower delays – up to 3000 ms total cascaded delay time (3 x configurable delay modules at 1000 ms each)dbx compression with dbx PeakStopPlus output limitersCrossover with support for full range up to mono 6-way configurations – selectable crossover filter types & slope rates with adjustable polarity & variable phase controlNoise Gate to remove unwanted low-level noise in sound systemSubharmonic Synthesis for deep, punchy bass3 x XLR inputs (selectable between 4 x AES or 3 x analog input channels), and 6 x analog outputsFront-panel RTA mic input with 48V phantom powerBuilt-in signal generator & RTA for system fine-tuning & troubleshootingLarge, bright, easy-to-read LCD display and 6-segment signal meters with input clip & output limiter indicators25 x factory / 75 x user presets with various speaker & amplifier tunings includedNetwork control via the free VENU360 Control Application for iOS, Android, Mac & Windows-compatible devices Product Specifications Inputs Number of Inputs: 3 x analog line inputs / 2 x AES digital inputs (shared connectors), 1 x RTA mic input Connectors: 3 x female XLRs (2 x selectable between analog / AES digital audio formats), 1 x female XLR RTA mic input Type: Electronically balanced, RF filtered Impedance: > 30 kOhms, balanced line to line Max Input Level (Line Inputs): > +28 dBu, balanced, ≤ 1% THD CMRR: > 50 dB at 1 kHz RTA Mic Preamp Phantom Power: +48 VDCAnalog Outputs Number of Outputs: 6 x line outputs Connectors: Male XLR Type: Electronically balanced, RF filtered Impedance: 120 Ohms, balanced line to line Max Output Level: +22 dBu, balanced, ≤1% THD Alignment Delay: Up to 1000 ms per output channelA/D Conversion A/D Converter: 24-bit with dbx Type IV conversion system A/D Dynamic Range: 117 dB A-weighted, 114 dB unweighted, 22 kHz BW Type IV Dynamic Range (22 kHz BW): 129 dB with transient material / A-weighted, 126 dB with transient material / unweighted, 121 dB typical with program material / A-weightedD/A Conversion D/A Converter: 24-bit D/A Dynamic Range: 116 dB A-weighted, 113 dB unweighted, 22 kHz BWSystem Performance Internal Processing Wordlength: 32-bit floating point Supported Sample Rates: 48/96 kHz (32-192 kHz using sample rate conversion) Dynamic Range: 114 dB A-weighted, 110 dB unweighted THD+Noise: 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain Frequency Response: 20 Hz - 20 kHz, +0 /- 0.5 dB Interchannel Crosstalk: < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured Latency: 2.57 ms at 48 kHz, 2.28 ms at 96 kHz (Analog input to output) / 2.31 ms at 48 kHz, 2.15 ms at 96 kHz (Digital AES input to output) Operating Temperature: 32 to 104° F / 0 to 40° CCompatibility N/APower Supply Operating Voltage: 100-240 VAC, 50/60 Hz Power Consumption: 30 WDimensions (H x W x D) 1.75 x 19.00 x 8.00" / 4.45 x 48.26 x 20.32 cmWeight 5.48 lb / 2.49 kg Packaging Info Package Weight 7.8 lbBox Dimensions (LxWxH) 22.2 x 11.4 x 3.7" dbx RTA-M Reference Microphone The RTA-M Reference Microphone from dbx is an omnidirectional mic designed for use with dbx DriveRack series real-time analyzers (sold separately) to provide an acoustic picture of a room. It can be used to capture audio and fine-tune your sound system performance to match the response characteristics of the room for live sound and recording applications. In addition, the RTA-M is built with a metal housing, requires phantom power (9 to 52 VDC), and includes a mic clip along with a hardcover case. Flat frequency responseOmnidirectional polar patternDesigned for the DriveRack seriesAccurate "pinking" / real-time analysis of your audioIt runs on phantom power (supplied by the DriveRack units) and comes with a clip and case Product Specifications Element TypeBack-electret condenserPolar Pattern OmnidirectionalFrequency Response 20 Hz to 20 kHzImpedance 250 Ohms ± 30% (@ 1 kHz)Sensitivity -63 dB +-3 dB (0 dB = 1 V/microbar @ 1 kHz indicated by open circuit )Operating Voltage9 to 52 VDC phantom power Packaging Info Package Weight 1.535 lbBox Dimensions (LxWxH) 12.9 x 10.75 x 4"
Price: 1265 USD
Location: Jamaica, New York
End Time: 2024-08-22T15:31:33.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Rack Unit Height: 1U
Number of Channels: 6
Analog/Digital: Analog & Digital
Brand: dbx
Input/Output Ports: RJ45 (Ethernet) Out, USB Out, XLR In, Analog Out, XLR Out
Form Factor: Rack Mountable
Features: Presets, Feedback Reduction, Equalizer, Built-in Effects
Effect/Enhancement: Parametric Equalization, Harmonic Enhancement, Graphic Equalization, Feedback, Normalizer, Compression/Limiting, Mastering, Delay
Type: Multi-Effects Processor
Model: dbx DriveRack VENU360
