496 Fuel Tank Filter Assembly B10-AL For Diesel and Gasoline 25gpm 150psi

Description: 496 Fuel Tank Filter Assembly Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25gpm 150psi with 1" NPT Top Cap Replaces B10-AL Product Description Compatible with fuel types:Fits common fuels such as unleaded gas,diesel,fuel oil,up to 20% biodiesel and related additives. Fuel filter element:30 micron,Provide high flow rates and superior filtration efficiency,protect fuels from particles such as rust,sand,dirt and water.With protective sheet to prevent the filter element from being destroyed or deformed by pressure. Top cap:with 1" NPT pipe fittings inlet and outlet marked at the top of the cap. Hyaline bowl:Makes it easy to visual monitor the fuel flow,the fuel flow will slow down when you need to replace the element.Drain valve installed at the bottom to drain water. Feature:Flow rate max 25 gpm.Working pressure up to 150 psi.Gravity flow rate is approximately 5 gpm. Suitable fuel type This Tank Filter is Designed for Use With Gasoline,Diesel or 20% Biodiesel (B20) Fuels. Installation 1.Attach filter top cap to storage tank valve on opening marked “IN”. 2.Attach hose and nozzle to filter opening marked “OUT”. 3.When installing the element and bowl, apply a coating of oil to each side of gasket. 4.These components should be hand tightened only.Over tightening of the filter bowl will result in difficulty in removal at a later date. 5.When assembly is complete, check for leaks. Feature Fuel filter element:30 micron with protective sheet Height:9.5” Inlet /Outlet size:1” NPT Hyaline bowl with Drain valve Flow rate:Max 25 gpm Working pressure:Up to 150 psi Gravity flow rate:Approximately 5 gpm

Price: 32.49 USD

Location: Walton, Kentucky

End Time: 2024-02-09T16:04:03.000Z

Shipping Cost: 0 USD