30 Dow U-428+ Auto Glass Windshield Urethane Primerless Adhesive Glue Sealant

Description: 30 CANS OF U428+PLUS URETHANE ADHESIVE CANS (3 BOXES OF 10 CANS EACH) + 24 NOZZLES.No glass primer requiredPinchweld and encapsulation MUST be primedWorking temperatures as low as 32˚FU-428+HV Safety Data SheetMDAT32˚F to 50˚F … 4 hoursAbove 50˚F … 3 hoursAPPLICATION EQUIPMENT: Battery powered applicator 14.4V or greater. DOW U428+ Is a high viscosity adhesive or very thick glue so we suggest using a professional caulking gun or Power gun when applying to a vehicle. If you are using a standard caulking gun or a hand pump please make sure and preheat the tubes between 10-15 minutes heat gun or hair dryer.Speed Installations by Eliminating Priming Step U-428 Plus adhesive are one-component, conventional-cure adhesives.They eliminate steps and speed installations by incorporating glass primer intothe urethane. They are primerless-to-glass and require only BETAPRIME™5504A primer if the metal is scratched during glass removal, or when bonding toencapsulations or pre-applied adhesive systems (PAAS). Both products provideimproved decking, even in hot weather.Conventional-cure adhesives like U-428 Plus adhesive rely ontemperature, humidity and time to cure. The water in the air causes a chemicalreaction in the adhesive. The adhesive bead cures from the outside to the centeras the moisture diffuses into the adhesive. The curing bonds the adhesive to thesubstrates and existing bead of urethane adhesive.ApplicationsStructurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glassOther uses, such as attaching hardware to glass and backfilling to install reveal moldings or other trim When using 428 plus on installing auto glass, you must use 5504 primer on the pinchweld only when bare metal or scratches are in the pinchweld. Primer will stop corrosion, rust and will bond the urethane to the glass to standards. We sell the primer as well if your situation requires it. If bonding urethane to a complete Bare Metal then BETAPRIME 5201 Bare Metal Etch Primer should be applied following the 5504 primer for proper bond. primer available at our store. --------------------------------------------------------- NOW SHIPPING WORLDWIDE WITH SAFE AND SECURE SHIPPING. WITH TRACKING NUMBER.FAST and FREE SHIPPING IN 50 USA states, Shipping to PR, VI, GUAM AND HAWAII.(extra charges may apply) Restocking fee of 20% may apply in case of return.30 DAYS EASY RETURNS POLICY. IF YOU HAVE ANY PROBLEM PLEASE CONFIRM UPON ITEM ARRIVAL, SEND US A MESSAGE.Do you need another model part or other side? Check out our ebay store for more items Bestjet parts. Automotive solutions since 1985

Price: 255 USD

Location: Calexico, California

End Time: 2024-08-11T07:05:19.000Z

Shipping Cost: 0 USD